ANSI, ASME, ASA, B16.5 LAP-VERBINDUNGSFLANSCH
KLASSE 150 / 300 / 600 / 900 / 1500 / 2500
Flanschabmessungen und ungefähre Massen
| ANSI, ASME, ASA, B16.5 150lb/sq.in.Überlappungsflansch | ||||||||||||
| Normale Größe | Außendurchm. | Dick.des Flansches | Durchmesser der Nabe an der Basis | Länge durch Nabe | Durchm.von Bore | Verrundungsradius | Anzahl der Löcher | Durchm.von Löchern | Durchm.von Bolzen | Durchm.des Lochkreises | Ca.Gewicht Pfund | |
| O | C | X | Y | B | r | |||||||
| 1/2″ | In. | 3.5 | 0,44 | 1.19 | 0,62 | 0,9 | 0,12 | 4 | 0,62 | 1/2 | 2,38 | 1 |
| mm. | 88,9 | 11.2 | 30.2 | 15.7 | 22.9 | 3 | 15.7 | 12.7 | 60,5 | 0,5 | ||
| 3/4″ | In. | 3,88 | 0,5 | 1.5 | 0,62 | 1.11 | 0,12 | 4 | 0,62 | 1/2 | 2,75 | 2 |
| mm. | 98,6 | 12.7 | 38.1 | 15.7 | 28.2 | 3 | 15.7 | 12.7 | 69,9 | 1 | ||
| 1″ | In. | 4.25 | 0,56 | 1,94 | 0,69 | 1,38 | 0,12 | 4 | 0,62 | 1/2 | 3.12 | 2 |
| mm. | 108 | 14.2 | 49.3 | 17.5 | 35.1 | 3 | 15.7 | 12.7 | 79,2 | 1 | ||
| 1 1/4″ | In. | 4.62 | 0,62 | 2.31 | 0,81 | 1,72 | 0,19 | 4 | 0,62 | 1/2 | 3.5 | 3 |
| mm. | 117.3 | 15.7 | 58,7 | 20.6 | 43,7 | 4.8 | 15.7 | 12.7 | 88,9 | 1 | ||
| 1 1/2″ | In. | 5 | 0,69 | 2,56 | 0,88 | 1,97 | 0,25 | 4 | 0,62 | 1/2 | 3,88 | 3 |
| mm. | 127 | 17.5 | 65 | 22.4 | 50 | 6.4 | 15.7 | 12.7 | 98,6 | 1 | ||
| 2″ | In. | 6 | 0,75 | 3.06 | 1 | 2.46 | 0,31 | 4 | 0,75 | 5/8 | 4,75 | 5 |
| mm. | 152,4 | 19.1 | 77,7 | 25.4 | 62,5 | 7.9 | 19.1 | 15.9 | 120,7 | 2 | ||
| 2 1/2″ | In. | 7 | 0,88 | 3,56 | 1.12 | 2,97 | 0,31 | 4 | 0,75 | 5/8 | 5.5 | 7 |
| mm. | 177,8 | 22.4 | 90,4 | 28.4 | 75,4 | 7.9 | 19.1 | 15.9 | 139,7 | 3 | ||
| 3" | In. | 7.5 | 0,94 | 4.25 | 1.19 | 3.6 | 0,38 | 4 | 0,75 | 5/8 | 6 | 8 |
| mm. | 190,5 | 23.9 | 108 | 30.2 | 91,4 | 9.7 | 19.1 | 15.9 | 152,4 | 4 | ||
| 3 1/2″ | In. | 8.5 | 0,94 | 4,81 | 1,25 | 4.1 | 0,38 | 8 | 0,75 | 5/8 | 7 | 11 |
| mm. | 215.9 | 23.9 | 122.2 | 31.8 | 104.1 | 9.7 | 19.1 | 15.9 | 177,8 | 5 | ||
| 4″ | In. | 9 | 0,94 | 5.31 | 1.31 | 4.6 | 0,44 | 8 | 0,75 | 5/8 | 7.5 | 13 |
| mm. | 228,6 | 23.9 | 134,9 | 33.3 | 116,8 | 11.2 | 19.1 | 15.9 | 190,5 | 6 | ||
| 5″ | In. | 10 | 0,94 | 6.44 | 1,44 | 5,69 | 0,44 | 8 | 0,88 | 3/4 | 8.5 | 15 |
| mm. | 254 | 23.9 | 163,6 | 36.6 | 144,5 | 11.2 | 22.4 | 19.1 | 215.9 | 7 | ||
| 6″ | In. | 11 | 1 | 7.56 | 1,56 | 6,75 | 0,5 | 8 | 0,88 | 3/4 | 9.5 | 19 |
| mm. | 279,4 | 25.4 | 192 | 39.6 | 171,5 | 12.7 | 22.4 | 19.1 | 241,3 | 9 | ||
| 8″ | In. | 13.5 | 1.12 | 9.69 | 1,75 | 8,75 | 0,5 | 8 | 0,88 | 3/4 | 11.75 | 30 |
| mm. | 342,9 | 28.4 | 246.1 | 44,5 | 222.3 | 12.7 | 22.4 | 19.1 | 298,5 | 14 | ||
| 10″ | In. | 16 | 1.19 | 12 | 1,94 | 10.92 | 0,5 | 12 | 1 | 7/8 | 14.25 | 43 |
| mm. | 406.4 | 30.2 | 304,8 | 49.3 | 277,4 | 12.7 | 25.4 | 22.2 | 362 | 20 | ||
| 12″ | In. | 19 | 1,25 | 14.38 | 2.19 | 12.92 | 0,5 | 12 | 1 | 7/8 | 17 | 64 |
| mm. | 482,6 | 31.8 | 365,3 | 55,6 | 328,2 | 12.7 | 25.4 | 22.2 | 431,8 | 29 | ||
| 14″ | In. | 21 | 1,38 | 15.75 | 3.12 | 14.18 | 0,5 | 12 | 1.12 | 1 | 18.75 | 105 |
| mm. | 533,4 | 35.1 | 400.1 | 79,2 | 360,2 | 12.7 | 28.4 | 25.4 | 476,3 | 48 | ||
| 16″ | In. | 23.5 | 1,44 | 18 | 3.44 | 16.19 | 0,5 | 16 | 1.12 | 1 | 21.25 | 140 |
| mm. | 596,9 | 36.6 | 457,2 | 87,4 | 411.2 | 12.7 | 28.4 | 25.4 | 539,8 | 64 | ||
| 18″ | In. | 25 | 1,56 | 19.88 | 3,81 | 18.2 | 0,5 | 16 | 1,25 | 1 1/8 | 22.75 | 160 |
| mm. | 635 | 39.6 | 505 | 96,8 | 462,3 | 12.7 | 31.8 | 28.6 | 577,9 | 73 | ||
| 20″ | In. | 27.5 | 1,69 | 22 | 4.06 | 20.25 | 0,5 | 20 | 1,25 | 1 1/8 | 25 | 195 |
| mm. | 698,5 | 42.9 | 558,8 | 103.1 | 514.4 | 12.7 | 31.8 | 28.6 | 635 | 88 | ||
| 24″ | In. | 32 | 1,88 | 26.12 | 4.38 | 24.25 | 0,5 | 20 | 1,38 | 1 1/4 | 29.5 | 275 |
| mm. | 812,8 | 47,8 | 663,4 | 111.3 | 616 | 12.7 | 35.1 | 31.8 | 749,3 | 125 | ||
| ANSI, ASME, ASA, B16.5 300lb/sq.in.Überlappungsflansch | ||||||||||||
| Normale Größe | Außendurchm.von | Dick.des Flansches | Durchmesser der Nabe an der Basis | Länge durch Nabe | Durchm.von Bore | Verrundungsradius | Anzahl der Löcher | Durchm.von Löchern | Durchm.von Bolzen | Durchm.des Lochkreises | Ca.Gewicht Pfund | |
| O | C | X | Y | B | r | |||||||
| 1/2″ | In. | 3,75 | 0,56 | 1.5 | 0,88 | 0,9 | 0,12 | 4 | 0,62 | 1/2 | 2,62 | 2 |
| mm. | 95,3 | 14.2 | 38.1 | 22.4 | 22.9 | 3 | 15.7 | 12.7 | 66,5 | 1 | ||
| 3/4″ | In. | 4.62 | 0,62 | 1,88 | 1 | 1.11 | 0,12 | 4 | 0,75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 47,8 | 25.4 | 28.2 | 3 | 19.1 | 15.9 | 82,6 | 1 | ||
| 1″ | In. | 4,88 | 0,69 | 2.12 | 1.06 | 1,38 | 0,12 | 4 | 0,75 | 5/8 | 3.5 | 3 |
| mm. | 124 | 17.5 | 53,8 | 26.9 | 35.1 | 3 | 19.1 | 15.9 | 88,9 | 1 | ||
| 1 1/4″ | In. | 5.25 | 0,75 | 2.5 | 1.06 | 1,72 | 0,19 | 4 | 0,75 | 5/8 | 3,88 | 4 |
| mm. | 133,4 | 19.1 | 63,5 | 26.9 | 43,7 | 4.8 | 19.1 | 15.9 | 98,6 | 2 | ||
| 1 1/2″ | In. | 6.12 | 0,81 | 2,75 | 1.19 | 1,97 | 0,25 | 4 | 0,88 | 3/4 | 4.5 | 6 |
| mm. | 155,4 | 20.6 | 69,9 | 30.2 | 50 | 6.4 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2″ | In. | 6.5 | 0,88 | 3.31 | 1.31 | 2.46 | 0,31 | 8 | 0,75 | 5/8 | 5 | 7 |
| mm. | 165.1 | 22.4 | 84.1 | 33.3 | 62,5 | 7.9 | 19.1 | 15.9 | 127 | 3 | ||
| 2 1/2″ | In. | 7.5 | 1 | 3,94 | 1.5 | 2,97 | 0,31 | 8 | 0,88 | 3/4 | 5,88 | 10 |
| mm. | 190,5 | 25.4 | 100.1 | 38.1 | 75,4 | 7.9 | 22.4 | 19.1 | 149,4 | 5 | ||
| 3" | In. | 8.25 | 1.12 | 4.62 | 1,69 | 3.6 | 0,38 | 8 | 0,88 | 3/4 | 6.62 | 13 |
| mm. | 209.6 | 28.4 | 117.3 | 42.9 | 91,4 | 9.7 | 22.4 | 19.1 | 168.1 | 6 | ||
| 3 1/2″ | In. | 9 | 1.19 | 5.25 | 1,75 | 4.1 | 0,38 | 8 | 0,88 | 3/4 | 7.25 | 17 |
| mm. | 228,6 | 30.2 | 133,4 | 44,5 | 104.1 | 9.7 | 22.4 | 19.1 | 184,2 | 8 | ||
| 4″ | In. | 10 | 1,25 | 5,75 | 1,88 | 4.6 | 0,44 | 8 | 0,88 | 3/4 | 7,88 | 22 |
| mm. | 254 | 31.8 | 146.1 | 47,8 | 116,8 | 11.2 | 22.4 | 19.1 | 200.2 | 10 | ||
| 5″ | In. | 11 | 1,38 | 7 | 2 | 5,69 | 0,44 | 8 | 0,88 | 3/4 | 9.25 | 28 |
| mm. | 279,4 | 35.1 | 177,8 | 50.8 | 144,5 | 11.2 | 22.4 | 19.1 | 235 | 13 | ||
| 6″ | In. | 12.5 | 1,44 | 8.12 | 2.06 | 6,75 | 0,5 | 12 | 0,88 | 3/4 | 10.62 | 39 |
| mm. | 317,5 | 36.6 | 206.2 | 52.3 | 171,5 | 12.7 | 22.4 | 19.1 | 269,7 | 18 | ||
| 8″ | In. | 15 | 1,62 | 10.25 | 2.44 | 8,75 | 0,5 | 12 | 1 | 7/8 | 13 | 58 |
| mm. | 381 | 41.1 | 260,4 | 62 | 222.3 | 12.7 | 25.4 | 22.2 | 330,2 | 26 | ||
| 10″ | In. | 17.5 | 1,88 | 12.62 | 3,75 | 10.92 | 0,5 | 16 | 1.12 | 1 | 15.25 | 91 |
| mm. | 444,5 | 47,8 | 320,5 | 95,3 | 277,4 | 12.7 | 28.4 | 25.4 | 387,4 | 41 | ||
| 12″ | In. | 20.5 | 2 | 14.75 | 4 | 12.92 | 0,5 | 16 | 1,25 | 1 1/8 | 17.75 | 140 |
| mm. | 520,7 | 50.8 | 374,7 | 101,6 | 328,2 | 12.7 | 31.8 | 28.6 | 450,9 | 64 | ||
| 14″ | In. | 23 | 2.12 | 16.75 | 4.38 | 14.18 | 0,5 | 20 | 1,25 | 1 1/8 | 20.25 | 190 |
| mm. | 584,2 | 53,8 | 425,5 | 111.3 | 360,2 | 12.7 | 31.8 | 28.6 | 514.4 | 86 | ||
| 16″ | In. | 25.5 | 2,25 | 19 | 4,75 | 16.19 | 0,5 | 20 | 1,38 | 1 1/4 | 22.5 | 250 |
| mm. | 647,7 | 57.2 | 482,6 | 120,7 | 411.2 | 12.7 | 35.1 | 31.8 | 571,5 | 113 | ||
| 18″ | In. | 28 | 2,38 | 21 | 5.12 | 18.2 | 0,5 | 24 | 1,38 | 1 1/4 | 24.75 | 295 |
| mm. | 711.2 | 60,5 | 533,4 | 130 | 462,3 | 12.7 | 35.1 | 31.8 | 628,7 | 134 | ||
| 20″ | In. | 30.5 | 2.5 | 23.12 | 5.5 | 20.25 | 0,5 | 24 | 1,38 | 1 1/4 | 27 | 370 |
| mm. | 774,7 | 63,5 | 587,2 | 139,7 | 514.4 | 12.7 | 35.1 | 31.8 | 685,8 | 168 | ||
| 24″ | In. | 36 | 2,75 | 27.62 | 6 | 24.25 | 0,5 | 24 | 1,62 | 1 1/2 | 32 | 550 |
| mm. | 914,4 | 69,9 | 701.5 | 152,4 | 616 | 12.7 | 41.1 | 38.1 | 812,8 | 249 | ||
| ANSI, ASME, ASA, B16.5 600lb/sq.in.Überlappungsflansch | ||||||||||||
| Normale Größe | Außendurchm.von | Dick.des Flansches | Durchmesser der Nabe an der Basis | Länge durch Nabe | Durchm.von Langeweile | Verrundungsradius | Anzahl der Löcher | Durchm.von Löchern | Durchm.von Schrauben | Durchm.des Lochkreises | Ca.Gewicht Pfund | |
| O | C | X | Y | B | r | |||||||
| 1/2″ | In. | 3,75 | 0,56 | 1.5 | 0,88 | 0,9 | 0,12 | 4 | 0,62 | 1/2 | 2,62 | 2 |
| mm. | 95,3 | 14.2 | 38.1 | 22.4 | 22.9 | 3 | 15.7 | 12.7 | 66,5 | 1 | ||
| 3/4″ | In. | 4.62 | 0,62 | 1,88 | 1 | 1.11 | 0,12 | 4 | 0,75 | 5/8 | 3.25 | 3 |
| mm. | 117.3 | 15.7 | 47,8 | 25.4 | 28.2 | 3 | 19.1 | 15.9 | 82,6 | 1 | ||
| 1″ | In. | 4,88 | 0,69 | 2.12 | 1.06 | 1,38 | 0,12 | 4 | 0,75 | 5/8 | 3.5 | 4 |
| mm. | 124 | 17.5 | 53,8 | 26.9 | 35.1 | 3 | 19.1 | 15.9 | 88,9 | 2 | ||
| 1 1/4″ | In. | 5.25 | 0,81 | 2.5 | 1.12 | 1,72 | 0,19 | 4 | 0,75 | 5/8 | 3,88 | 5 |
| mm. | 133,4 | 20.6 | 63,5 | 28.4 | 43,7 | 4.8 | 19.1 | 15.9 | 98,6 | 2 | ||
| 1 1/2″ | In. | 6.12 | 0,88 | 2,75 | 1,25 | 1,97 | 0,25 | 4 | 0,88 | 3/4 | 4.5 | 7 |
| mm. | 155,4 | 22.4 | 69,9 | 31.8 | 50 | 6.4 | 22.4 | 19.1 | 114.3 | 3 | ||
| 2″ | In. | 6.5 | 1 | 3.31 | 1,44 | 2.46 | 0,31 | 8 | 0,75 | 5/8 | 5 | 9 |
| mm. | 165.1 | 25.4 | 84.1 | 36.6 | 62,5 | 7.9 | 19.1 | 15.9 | 127 | 4 | ||
| 2 1/2″ | In. | 7.5 | 1.12 | 3,94 | 1,62 | 2,97 | 0,31 | 8 | 0,88 | 3/4 | 5,88 | 12 |
| mm. | 190,5 | 28.4 | 100.1 | 41.1 | 75,4 | 7.9 | 22.4 | 19.1 | 149,4 | 5 | ||
| 3" | In. | 8.25 | 1,25 | 4.62 | 1,81 | 3.6 | 0,38 | 8 | 0,88 | 3/4 | 6.62 | 15 |
| mm. | 209.6 | 31.8 | 117.3 | 46 | 91,4 | 9.7 | 22.4 | 19.1 | 168.1 | 7 | ||
| 3 1/2″ | In. | 9 | 1,38 | 5.25 | 1,94 | 4.1 | 0,38 | 8 | 1 | 7/8 | 7.25 | 20 |
| mm. | 228,6 | 35.1 | 133,4 | 49.3 | 104.1 | 9.7 | 25.4 | 22.2 | 184,2 | 9 | ||
| 4″ | In. | 10.75 | 1.5 | 6 | 2.12 | 4.6 | 0,44 | 8 | 1 | 7/8 | 8.5 | 36 |
| mm. | 273.1 | 38.1 | 152,4 | 53,8 | 116,8 | 11.2 | 25.4 | 22.2 | 215.9 | 16 | ||
| 5″ | In. | 13 | 1,75 | 7.44 | 2,38 | 5,69 | 0,44 | 8 | 1.12 | 1 | 10.5 | 61 |
| mm. | 330,2 | 44,5 | 189 | 60,5 | 144,5 | 11.2 | 28.4 | 25.4 | 266,7 | 28 | ||
| 6″ | In. | 14 | 1,88 | 8,75 | 2,62 | 6,75 | 0,5 | 12 | 1.12 | 1 | 11.5 | 78 |
| mm. | 355,6 | 47,8 | 222.3 | 66,5 | 171,5 | 12.7 | 28.4 | 25.4 | 292.1 | 35 | ||
| 8″ | In. | 16.5 | 2.19 | 10.75 | 3 | 8,75 | 0,5 | 12 | 1,25 | 1 1/8 | 13.75 | 110 |
| mm. | 419.1 | 55,6 | 273.1 | 76,2 | 222.3 | 12.7 | 31.8 | 28.6 | 349,3 | 50 | ||
| 10″ | In. | 20 | 2.5 | 13.5 | 4.38 | 10.92 | 0,5 | 16 | 1,38 | 1 1/4 | 17 | 170 |
| mm. | 508 | 63,5 | 342,9 | 111.3 | 277,4 | 12.7 | 35.1 | 31.8 | 431,8 | 77 | ||
| 12″ | In. | 22 | 2,62 | 15.75 | 4.62 | 12.92 | 0,5 | 20 | 1,38 | 1 1/4 | 19.25 | 200 |
| mm. | 558,8 | 66,5 | 400.1 | 117.3 | 328,2 | 12.7 | 35.1 | 31.8 | 489 | 91 | ||
| 14″ | In. | 23.75 | 2,75 | 17 | 5 | 14.18 | 0,5 | 20 | 1.5 | 1 3/8 | 20.75 | 250 |
| mm. | 603.3 | 69,9 | 431,8 | 127 | 360,2 | 12.7 | 38.1 | 34.9 | 527.1 | 113 | ||
| 16″ | In. | 27 | 3 | 19.5 | 5.5 | 16.19 | 0,5 | 20 | 1,62 | 1 1/2 | 23.75 | 365 |
| mm. | 685,8 | 76,2 | 495,3 | 139,7 | 411.2 | 12.7 | 41.1 | 38.1 | 603.3 | 166 | ||
| 18″ | In. | 29.25 | 3.25 | 21.5 | 6 | 18.2 | 0,5 | 20 | 1,75 | 1 5/8 | 25.75 | 435 |
| mm. | 743 | 82,6 | 546.1 | 152,4 | 462,3 | 12.7 | 44,5 | 41.3 | 654.1 | 197 | ||
| 20″ | In. | 32 | 3.5 | 24 | 6.5 | 20.25 | 0,5 | 24 | 1,75 | 1 5/8 | 28.5 | 570 |
| mm. | 812,8 | 88,9 | 609.6 | 165.1 | 514.4 | 12.7 | 44,5 | 41.3 | 723,9 | 259 | ||
| 24″ | In. | 37 | 4 | 28.25 | 7.25 | 24.25 | 0,5 | 24 | 2 | 1 7/8 | 33 | 810 |
| mm. | 939,8 | 101,6 | 717,6 | 184,2 | 616 | 12.7 | 50.8 | 47,6 | 838,2 | 367 | ||
Produktionskapazität und Kaufdetails
1. Versorgungsflanschabmessungen DN15 – DN2000 (1/2″ – 80″), geschmiedeter Flansch.
2.Material Kohlenstoffstahl: ASTM A105, A181, A350 LF1, A350LF2, A350LF3, A36, A234 WPB, Q235B, 20#, 20Mn usw.
3.Material Edelstahl: ASTM A182 F304, F304L, F316, F316L, F321 usw.
4.Flansche gegen Rost: Rostschutzöl, schwarze Farbe, gelbe Farbbeschichtung, feuerverzinkt, kaltverzinkt usw.
5. Monatsproduktion: 3000 Tonnen pro Monat.
6. Lieferbedingungen: CIF, CFR, FOB, EXW.
7. Zahlungsbedingungen: Banküberweisung (T/T), unwiderrufliches Akkreditiv bei Sichtkontakt usw.
8. Mindestbestellmenge: 1 Tonne oder 100 Stück.
9. Qualitätsgarantie: EN10204 3.1-Zertifikat, Mühlenzertifikat, Inspektion durch Dritte, kostenloser Ersatzservice.
10. Finden Sie weitere Anforderungen im Flanschmarkt.